View DF1EC-2P-25DSA_1232268.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
DF1E Series
Full lock function added
Inner-lock system full lock mechanism
Mis-insertion prevention
sFeatures
1. Full Lock Function Added
The inner lock system adopts a full lock mechanism. This mechanism prevents disengagement to occur due to an unexpected external shock.
Double lock engaged
Double lock engaged
2. Increase in Crimping Contact Fixation Force and Semi-insertion Prevention
The double lock is activated for the use method to give a stress to the cable, to increase crimping contact fixation force, and to prevent the semi-insertion of the crimping contact.
3. Mold Lance Adopted
Since the contact lance may be deformed involving in the contact after the crimping process, the mold lance has been adopted.
4. Mis-insertion Prevention
Equipped with the mechanism to completely prevent reverse insertion and insertion between dissimilar contacts.
5. Means to Prevent Solder Crack
The glass enforcement resin is adopted for the pin header to prevent a solder crack to occur due to heat compression.
8. Correspond to Automatic Insertion Machine
The radial tape packaging is provided for 2 to 8 contacts on the straight pin header side, in order to correspond to mass production. 9. Various Applications With the same series, various applications can be used for the board solder dip type and inline.
6. Correspond to Potting
Corresponding to potting, the pin header is provided for product variations. Corresponding to potting up to 8mm and mounting height 19.8mm (no retainer), the low profile is achieved.
7. Production Facility Cost Reduction
The female crimping contact uses the DF1B series crimping contact, which has been conventionally marketed. Investment for new facilities isn't needed. However, if the retainer is installed in the cable with AWG#22 or more wire, use the DF1E crimping contact. The female crimping contact for in-line is used together with the DF1B applicator. Therefore, no investment is needed for new facilities.
sApplications
Electronic equipment, office machines, industrial equipment, and consumer equipment, and so on
B116
sProducts Specifications
Current rating Note 1. AWG#20 to 24 : 3A 26 : 2A 28 : 1A 30 : 0.5A Voltage rating 250VAC
Rating
Operating Temperature Range : -35 to +85c Note 2. Operating Moisture Range : -20 to 80%
Storage Temperature Range : -10 to +60c Note 3. Storage Moisture Range : -40 to 70%
C-UL Rating AWG#20 to #22 : 3A Current rating Rating Voltage rating Item 1. Contact Resistance 2. Insulation Resistance 3. Withstanding voltage 4. Single Insertor/Extraction Forth 5. Durability (Mating/un-mating) 6. Vibration 7. Shock 8. Humidity (Steady state) 9. Temperature Cycle 10. Resistance to Soldering heat 30m ohms max. 1000M ohms min. No flashover or insulation breakdown. MIN 0.4N, MAX 4.4N 30m ohms max No electrical discontinuity of 1s or more No electrical discontinuity of 1s or more 30m ohms max 30m ohms max. No deformation of components affecting performance. Specification 500V DC AWG#24 to #28 : 1A AWG#30 30V AC : 0.5A
sC-UL File No. UL :E52653
Condition Measured at 20mV max. and 1mA 650V AC/1 minute Measured at the square steel pin with 0.6350.002 30 cycles Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. Acceleration of 490 m/s2, 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis 96 hours at temperature of 40c and humidity of 90% to 95% (-55c: 30 minutes-> 5 to 35c: 5 minutes-> 85c: 30 minutes-> 5 to 35c: 5 minutes) 5 cicles Flow: 250c for 10 seconds Manual soldering: 300c for 3 seconds
Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
sMaterial
Product Socket Header In-line Plug retainer Crimping contact Part Insulator Insulator Contact Insulator Insulator Contact Material Polyamide Polyamide Brass Polyamide Polyamide Phosphor copper Treatment White Beige Tin-lead plated White Black Tin plated Remarks UL94V-0 UL94V-0 ------- UL94V-0 UL94V-0 -------
Note : The whisker method is implemented for HRS tin plating.
B117
sOrdering Information
qPin Header
DF 1E C - * P - 2.5 DSA
q w e r t y u
q Series Name : DF w Series No. : 1E e Hold Types
Standard Product With Boss C Without Boss G Potting With Boss Without Boss
r Number of Contacts : 2 to 15 contacts t Connector Type P : Pin Header y Contact Pitch : 2.5mm u Form type DSA : Straight through hole DS : Right Angle Type
Note 1 : The right angle pin header has no symbol. Note 2 : The potting header has 2 to 10 contacts.
qSocket
DF 1E - * S - 2.5 C
q w e r t y
q Series Name : DF w Series No. : 1E e Number of Contacts : 2 to 15 contacts
r Connector type S: Socket t Contact Pitch : 2.5mm y Form Type C : Crimping socket
qIn-line Plug
DF 1E A - * EP - 2.5 C
q w e r t y u
q Series Name : DF w Series No. : 1E e In-line Plug type Blank: With Panel mount Lock A : Without Panel mount Lock
r Number of Contacts : 2 to 10 contacts t EP : In-line plug y Contact Pitch : 2.5mm u Form Type C : Crimping socket
qCrimping Contact
DF 1E - ** SCF
q w e r
q Series Name : DF w Series No. Socket side Plug side : : 1B (Note 1) 1E (Note 1) : 1E
e Applicable Cable Size
2022 : AWG#20 to #22 2428 : WG#24 to #28 30 : AWG#30
r Packaging Type SCF : Female contact : Reel SF PC : Female contact : Bag : Male contact : Bag PCF : Male contact : Reel
Note 1 : When the retainer is used, use DF1E-2022SC(F), DF1B2428SC(F), and DF1B-30SC(F) contacts. Note 1 : When no retainer is used, all DF1B-**SC(F) and DF1E2022SC(F) contacts can be used.
qRetainer
DF 1E - * RS/P - 2.5
q w e r t
q Series Name : DF w Series No. : 1E e Number of Contacts : 2 to 10 contacts
r Connector Type RS/P : Retainer Commonly used for socket and in-line plug t Contacts Pitch:2.5mm
B118
sApplication Pattern
Socket
Retainer
Photo : Contact Inserted
Pin Header
qStraight Type
In-line Plug
qIn-line Plug (Panel Mount Lock Type)
Photo: Contact Inserted qStraight Potting Type qIn-line Plug
Photo: Contact Inserted qRight Angle Type
B119
sRight Angle Pin Header
8 6.95 5.9
5.4 Contact No. mark
Mold Cavity No. mark
10
A
0.5
M 0.64
P = 2.5 A B Contact No.1 indicated
2.9
10.8
8.3 Note 2
13.8
3.2
Part Number DF1E -02P-2.5DS(**) DF1E -03P-2.5DS(**) DF1E -04P-2.5DS(**) DF1E -05P-2.5DS(**) DF1E -06P-2.5DS(**) DF1E -07P-2.5DS(**) DF1E -08P-2.5DS(**) DF1E -09P-2.5DS(**) DF1E -10P-2.5DS(**) DF1E -11P-2.5DS(**) DF1E -12P-2.5DS(**) DF1E -13P-2.5DS(**) DF1E -14P-2.5DS(**) DF1E -15P-2.5DS(**)
CL No. 541 - 0985- 0 -** 541 - 0986- 3 -** 541 - 0987- 6 -** 541 - 0988- 9 -** 541 - 0989- 1 -** 541 - 0990- 0 -** 541 - 0991- 3 -** 541 - 0992- 6 -** 541 - 0993- 9 -** 541 - 0994- 1 -** 541 - 0995- 4 -** 541 - 0996- 7 -** 541 - 0997- 0 -** 541 - 0998- 2 -**
Number of Contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15
A 02.5 05.0 07.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0
B 07.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0
The symbol ** included in HRS No. and the product spec No. indicates the Specific No.
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity for delivery will be changed according to the Specific No. Note 2. : The 2 to 4 contacts differ in two convex portions from those in above figures. The 2 and 3 contacts are not contained, but the 4 contact connector is contained in the center at one point. Note 3. : Styles of 2 to 4 contact connectors partially differ from those in above figures.
BPCB mounting pattern (Board Thickness t = 1.6 0.1)
A0.1 P = 2.50.05
*
-
O1
.1
0
+
0.
1
B120
4.5
sStraight Pin Header
6.95 8 5.9
5.4 Contact No. mark Mold Cavity No. mark
10
A
0.5
P = 2.5 A B Contact No.1 indicated
10.8
8.3
M 0.64
3.6
Note 2
3.2
Part Number DF1EC-02P-2.5DSA(**) DF1EC-03P-2.5DSA(**) DF1EC-04P-2.5DSA(**) DF1EC-05P-2.5DSA(**) DF1EC-06P-2.5DSA(**) DF1EC-07P-2.5DSA(**) DF1EC-08P-2.5DSA(**) DF1EC-09P-2.5DSA(**) DF1EC-10P-2.5DSA(**) DF1EC-11P-2.5DSA(**) DF1EC-12P-2.5DSA(**) DF1EC-13P-2.5DSA(**) DF1EC-14P-2.5DSA(**) DF1EC-15P-2.5DSA(**)
CL No. 541- 0867- 4 -** 541- 0868- 7 -** 541- 0869- 0 -** 541- 0870- 9 -** 541- 0871- 1 -** 541- 0872- 4 -** 541- 0873- 7 -** 541- 0874- 0 -** 541- 0875- 2 -** 541- 0876- 5 -** 541- 0877- 8 -** 541- 0878- 0 -** 541- 0879- 3 -** 541- 0880- 2 -**
Number of Contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15
A 02.5 05.0 07.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0
B 07.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0 37.5 40.0
The symbol ** included in HRS No. and the product spec No. indicates the Specific No.
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity for delivery will be changed according to the Specific No. Note 2. : The 2 to 4 contacts differ in two convex portions from those in above figures. The 2 and 3 contacts are not contained, but the 2 and 3 contacts are not contained, and 4 contact is in the center at one point. Note 3. : Styles of 2 to 4 contacts partially differ from those in above figures. Note 4. : The radial package is prepared for DF1EC-*P-2.5DSA(25).However, 2 to 8 contacts only are provided. (Quantity of packaged 2 and 3 contacts: 1000pcs., 4 to 8 contacts: 400pcs.)
BPCB mounting pattern (Board Thickness t = 1.6 0.1)
A0.1 P = 2.50.05
*
-
O1
.1
0
+
0.
1
4.5
B121
sStraight Pin Header for Potting
C 6.95 5.9
5.4 Contact No. mark Mold Cavity No. mark
10
A
P=
2.5 A B Contact No.1 indicated
8.3 3 16.3
M 0.64
3.2
Note 2
Note 2
4.5
Part Number DF1EG -02P-2.5DSA(**) DF1EG -03P-2.5DSA(**) DF1EG -04P-2.5DSA(**) DF1EG -05P-2.5DSA(**) DF1EG -06P-2.5DSA(**) DF1EG -07P-2.5DSA(**) DF1EG -08P-2.5DSA(**) DF1EG -09P-2.5DSA(**) DF1EG -10P-2.5DSA(**) DF1EG -11P-2.5DSA(**)
CL No. 541 - 0923 - 3** 541 - 0924 - 6** 541 - 0925 - 9** 541 - 0926 - 1** 541 - 0927 - 4** 541 - 0928 - 7** 541 - 0929 - 0** 541 - 0930 - 9** 541 - 0931 - 1** 541 - 0932 - 4**
Number of Contacts 2 3 4 5 6 7 8 9 10 11
A 02.5 05.0 07.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0
B 07.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0
C 7.8 7.8 7.8 8.0 8.0 8.0 8.0 8.0 8.0 8.0
The symbol ** included in HRS No. and the product spec No. indicates the Specific No.
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the product per bag. However, the quantity for delivery will be changed according to spec number. Note 2. : The 2 to 6 and 9 to 10 contact connectors differ in two convex portions from those in above figures. The 2 to 5 and 9 to 10 contacts are not contained, but the 6 contact is bonded to the convex portion at both ends. Note 3. : Styles of 2 to 4 contact may partially differ from the above figures. Note 4. : The radial tape packaging is prepared for DF1EG-*P-2.5DSA(25).However, 2 to 8 contacts are available. (Quantity of packaged 2 and 3 contacts : 1000pcs., 4 to 8 contacts: 400pcs.)
BPCB mounting pattern (Board Thickness t = 1.6 0.1)
A0.1 P = 2.50.05
*
-
O1
.1
0
+
0.
1
B122
sIn-line Plug (Panel Mount Lock Type)
2.8 A B P = 2.5 2.8 Mold Cavity No. mark Contact No. mark 0.9
10
8.1 6.9
A
C Contact No.1 indicated
18.8
12
10
9
7
5
3
1
Photo: Contact Inserted.
Contact No. indicated Contact No.1 indicated
Note 2
Note 3
Part Number DF1E-02EP-2.5C(**) DF1E-03EP-2.5C(**) DF1E-04EP-2.5C(**) DF1E-05EP-2.5C(**) DF1E-06EP-2.5C(**) DF1E-07EP-2.5C(**) DF1E-08EP-2.5C(**) DF1E-09EP-2.5C(**) DF1E-10EP-2.5C(**)
CL No. 541- 0943- 0 -** 541- 0944- 3 -** 541- 0945- 6 -** 541- 0946- 9 -** 541- 0947- 1 -** 541- 0948- 4 -** 541- 0949- 7 -** 541- 0950- 6 -** 541- 0951- 9 -**
Number of Contacts 2 3 4 5 6 7 8 9 10
A 8.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0
B 2.5 5.0 7.5 10.0 12.5 15.0 17.5 20.0 22.5
C 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0
D 8.4 10.9 13.4 15.9 18.4 20.9 23.4 25.9 28.4
E 11.9 14.4 16.9 19.4 21.9 24.4 26.9 29.4 31.9
The symbol ** included in HRS No. and the product spec No. indicates the Specific No. Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity for delivery will be changed according to the Specific No. Note 2. : In regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. Note 3. In regard to 2 to 7 contacts, 2 convex portions are different from those in the above figures. Note 4. Use the no radius side at the panel edge in the looking area. Note 5. : Panel fixation is loosened. (May be enlarged according to the panel board thickness.) Note 6. : Styles of 2 to 4 contact partially differ from those in the above figures.
* Refer to page B122 for the retainer.
BPanel Cutout
(E+ D
+0.1 0 +0.1 0 +0.2 0
Panel Thickness 1.7 to 2.0 1.3 to 1.6 0.9 to 1.2 0.7 to 0.8
X 1.5
1.1 +0.1 0
5.8
Panel
+0.1 8.4 0
1.0
+0.1 0
0.0
4.20.05
3.5
0.5
Note 4
B123
sIn-line Plug
P = 2.5 0.9
A B
Mold Cavity No. mark Contact No. mark
10
8.1 6.9
A
Contact No.1 indicated
18.8
Photo: Contact Inserted
10
9
7
5
3
1
Contact No. mark Contact No.1 indicated
Note 2
Note 3
Part Number DF1EA -02EP-2.5C(**) DF1EA -03EP-2.5C(**) DF1EA -04EP-2.5C(**) DF1EA -05EP-2.5C(**) DF1EA -06EP-2.5C(**) DF1EA -07EP-2.5C(**) DF1EA -08EP-2.5C(**) DF1EA -09EP-2.5C(**) DF1EA -10EP-2.5C(**)
CL No. 541 - 0957 - 5 - ** 541 - 0958 - 8 - ** 541 - 0959 - 0 - ** 541 - 0960 - 0 - ** 541 - 0961 - 2 - ** 541 - 0962 - 5 - ** 541 - 0963 - 8 - ** 541 - 0964 - 0 - ** 541 - 0965 - 3 - **
Number of Contacts 2 3 4 5 6 7 8 9 10
A 08.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0
B 02.5 05.0 07.5 10.0 12.5 15.0 17.5 20.0 22.5
The symbol ** included in HRS No. and the product spec No. indicate a Specific No.
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity for delivery will be changed according to the Specific No. Note 2. : In regard to 2 to 5 contacts, the retainer fixed convex portions are located at both ends. Note 3. : 2 to 7 contacts do not contain two convex portions, which is different from the above figure. Note 4. : Styles of 2 to 4 contacts partially differ from the above figures. * Refer to page B122 for retainer.
B124
sSocket
4.55
P = 2.5 A
B C Note 2
Photo: Contact Inserted
11.8
8.5
1
10
No. 1 contact indicated
Contact No. mark 7.55
A
Mold Cavity No. mark Note 3 Note 3 Note 4 Note 4
Part Number DF1E -02S-2.5C(**) DF1E -03S-2.5C(**) DF1E -04S-2.5C(**) DF1E -05S-2.5C(**) DF1E -06S-2.5C(**) DF1E -07S-2.5C(**) DF1E -08S-2.5C(**) DF1E -09S-2.5C(**) DF1E -10S-2.5C(**) DF1E -11S-2.5C(**) DF1E -12S-2.5C(**) DF1E -13S-2.5C(**) DF1E -14S-2.5C(**) DF1E -15S-2.5C(**)
CL No. 541 - 0811 - 0 - ** 541 - 0812 - 2 - ** 541 - 0813 - 5 - ** 541 - 0814 - 8 - ** 541 - 0815 - 0 - ** 541 - 0816 - 3 - ** 541 - 0817 - 6 - ** 541 - 0818 - 9 - ** 541 - 0819 - 1 - ** 541 - 0820 - 0 - ** 541 - 0821 - 3 - ** 541 - 0822 - 6 - ** 541 - 0823 - 9 - ** 541 - 0824 - 1 - **
Number of Contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15
A 02.5 05.0 07.5 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0 32.5 35.0
B 08.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0 30.5 33.0 35.5 38.0 40.5
C 05.4 07.9 10.4 12.9 15.4 17.9 20.4 22.9 25.4 27.9 30.4 32.9 35.4 37.9
The symbol ** included in HRS No. and the product spec No. indicate a Specific No.
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity for delivery will be changed according to spec number. Note 2. : The 2 contact connector is equipped with the convex portion to prevent false-insertion. Note 3. : The 2 consult Has no wall on the locking side Note 4. : The 2 to 5 contacts contain the retainer fixed convex portions at both ends. * Refer to page B122 for the retainer.
B125
sRetainer
1.9
A
B P = 2.5
1.7 0.7
5.9 3.3 1.5
Note2
Note2
Contact No. mark
A1
Mold Cavity No. mark
0
Part Number DF1E -02RS/P-2.5(**) DF1E -03RS/P-2.5(**) DF1E -04RS/P-2.5(**) DF1E -05RS/P-2.5(**) DF1E -06RS/P-2.5(**) DF1E -07RS/P-2.5(**) DF1E -08RS/P-2.5(**) DF1E -09RS/P-2.5(**) DF1E -10RS/P-2.5(**)
CL No. 541 - 0971 - 6 541 - 0972 - 9 541 - 0973 - 1 541 - 0974 - 4 541 - 0975 - 7 541 - 0976 - 0 541 - 0977 - 2 541 - 0978 - 5 541 - 0979 - 8
Number of Contacts 2 3 4 5 6 7 8 9 10
A 08.0 10.5 13.0 15.5 18.0 20.5 23.0 25.5 28.0
B 02.5 05.0 07.5 10.0 12.5 15.0 17.5 20.0 22.5
The symbol ** included in HRS No. and the product spec No. indicates the Specific No.
Note 1. : A packaging quantity is delivered by the bag unit (100 pcs.). If needed, please order the products per bag. However, the quantity for delivery will be changed according to spec number. Note 2. : The 2 to 4 contacts contain socket and plug fixed holes at both ends. * This retainer can be used together with the socket and relay plug.
B126
sPlug Crimping Contact
1.5 0.64 2.2 0.64
19.9
14.9
6.5
2.2 1.2
qApplicable Cable (Tin plating annealed copper wire)
Conductor Size (Wire construction)
AWG # 20 (21 cores./0.18mm) AWG # 22 (17 cores./0.16mm) AWG # 24 (11 cores./0.16mm) AWG # 26 (07 cores./0.16mm) AWG # 28 (07 cores./0.127mm) AWG # 30 (07 cores./0.1mm)
0.8
qRecommended Cable
UL1061, UL1007
qStrip Length
3.0 to 3.7mm Note : If other cables are used instead of the applicable cable, contact Hirose sales department.
Part Number DF1E - 2022PCF DF1E - 2022PC DF1E - 2428PCF DF1E - 2428PC DF1E - 30PCF DF1E - 30PC
CL No. 541 - 0937 - 8 541 - 0938 - 0 541 - 0939 - 3 541 - 0940 - 2 541 - 0941 - 5 541 - 0942 - 8
Applicable Cable Indication 20 22 24 28 30
Applicable Cable AWG AWG # 20 AWG # 22 AWG # 24 AWG # 28 AWG # 30 Jacket Diameter 1.2 to 1.9mm 0.9 to 1.5mm 0.6 to 1.2mm
Packaging Type Reel Bag Reel Bag Reel Bag
Quantity 10,000 100 10,000 100 10,000 100
q Crimping Contact Extraction Tool DF-C-PO(B)
B127
sSocket Crimping Contact
qDF1E-2022SCF qDF1B - * * * * SCF
1.75 1.75 1.4 1.95 0.83 Applicable cable indicated Applicable cable indicated 1.95 0.975
3.35
2.55
9.4
1.6
12.9
6.1
1.6
0.55
14
9.5
2.5
2.4
qApplicable Cable (Tin plating annealed copper wire)
Conductor Size (Wire construction)
AWG # 20 (21 cores./0.18mm) AWG # 22 (17 cores./0.16mm) AWG # 24 (11 cores./0.16mm) AWG # 26 (07 cores./0.16mm) AWG # 28 (07 cores./0.127mm) AWG # 30 (07 cores./0.1mm)
1.4
qRecommended Cable
UL1061, UL1007
qStrip Length
2.0mm to 2.5mm Note : If other cables are used instead of the applicable cable, consult Hirose sales department.
Part Number DF1E - 2022SCF DF1E - 2022SC DF1B - 2022SCF DF1B - 2022SC DF1B - 2428SCF DF1B - 2428SC DF1B - 30SCF DF1B - 30SC
CL No. 541 - 0999 - 5 541 - 1000 - 2 541 - 0223 - 1 541 - 0224 - 4 541 - 0678 - 1 541 - 0679 - 4 541 - 0682 - 9 541 - 0683 - 1
Applicable Cable Indication 20 22 20 22 24 28 30
Applicable Cable AWG AWG # 20 AWG # 22 AWG # 20 AWG # 22 AWG # 24 AWG # 28 AWG # 30 Jacket Diameter 1.2 to 1.9mm 1.2 to 1.9mm 0.9 to 1.5mm 0.6 to 1.2mm
1.4
1
Packaging Type Reel Bag Reel Bag Reel Bag Reel Bag
Quantity 10,000 100 10,000 100 10,000 100 10,000 100
q Crimping Contact Extraction Tool DF-C-PO(B)
B128
BCrimping Tools
Item Part Number AP105 - DF1E - 2022S AP105 - DF1B - 2022S AP105 - DF1B - 2428S Applicator AP105 - DF1B - 30S AP105 - DF1B - 2022P AP105 - DF1B - 2428P AP105 - DF1B - 30P Main Press Unit CM - 105 HT102/DF1E - 2022S DF1B - TA2022SHC DF1B - TA2428SHC Manual Crimping Tool DF1B - TA30SHC HT102/DF1BE - 2022P HT102/DF1BE - 2428P HT102/DF1BE - 30P Contact Extraction Tool DF - C - PO (B)
K K K K K K K K K K K K K K K K K K K K
CL No. 901 - 4561 - 0 901 - 4510 - 9 901 - 4518 - 0 901 - 4517 - 8 901 - 4509 - 0 901 - 4521 - 5 901 - 4519 - 3 901 - 0005 - 4 550 - 0277 - 1 550 - 0182 - 7 550 - 0209 - 1 550 - 0211 - 3 550 - 0278 - 4 550 - 0279 - 7 550 - 0280 - 6 550 - 0179 - 2
Applicable Contact DF1E - 2022SCF DF1B - 2022SCF DF1B - 2428SCF DF1B - 30SCF DF1E - 2022PCF DF1E - 2428PCF DF1E - 30PCF ------ DF1E - 2022SC DF1B - 2022SC DF1B - 2428SC DF1B - 30SC DF1E - 2022PC DF1E - 2428PC DF1E - 30PCF DF1E - 2022SC (F) DF1B - * * * * SC (F) DF1E - * * * * PC (F)
K Note 1. : Add "K" to the last number of the product, in order to use DF1B series tools, which have been conventionally merchandized. Note 2. : f any trouble has occurred due to other tools, which are not designated by Hirose, Hirose won't guarantee any products.
B129
BApplication Pattern
qStandard Header
8.5
DF1E _ * S _ 2.5 C DF1E# _ * P _ 2.5 DSA
DF1E _ * RS / P _ 2.5 18.8 17.3 DF1E _ * P _ 2.5 DS DF1E _ * RS / P _ 2.5
14.3
15.8
8.5
DF1E _ * S _ 2.5 C
3.7
3
10.8 14.3
qHeader for Potting
8 DF1E _ * S _ 2.5 C DF1E _ * RS / P _ 2.5
Potting Resin
19.8
8 MAX
DF1E# _ * P _ 2.5 DSA
3.2
qPanel Mounting Lock In-line Plug
11.7
25.3 17 25.3 DF1E _ * RS / P _ 2.5
DF1E _ * RS / P _ 2.5 Panel
8.1
21.3
qIn-line Plug
9
DF1E _ * RS / P _ 2.5 DF1E _ * EP _ 2.5 C 15.5 22.3
DF1E _ * S _ 2.5 C
DF1E _ * RS / P _ 2.5
DF1E _ * S _ 2.5 C DF1EA _ * EP _ 2.5 C 22.3
B130
9
BPrecautions
1. Recommended Soldering Condition : Flow: 250c for 3 seconds
Manual soldering: 290c for 2 seconds
2. Cleaning Condition
: Refer to Nylon Connector Use Hand book. However, if the connector is cleaned by the potting header, the detergent remains within the connector, which will cause malfunction. : Refer to Nylon Connector Use Hand book. : q To remove the connector, if the connector is forcedly removed, it will cause connector damage. If the connector is hardly removed, slightly push the connector once, and then remove it using the lock. q In some method for laying the cable within equipment, a tension may be applied to the cable so as to remove the contact. In this case, it is recommended to use the retainer. q If the potting process is implemented, it is desirable to fill the connector with resin, considering the resin surface tensile force. q The color phase of this product may be slightly different from that of the forming product according to the manufacturing lot and future storage conditions, however the difference doesn't affect the performance.
3. Connection Condition 4. Cautions
B131

▲Up To Search▲

Price & Availability of DF1EC-2P-25DSA

	To Download DF1EC-2P-25DSA Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .